{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Arbor for indexable drills Form ADB BT 50
Article no.: 303129
Article code:
- Arbor standard: ISO 7388-2; JIS B6339
- Shape: ADB
- Balance quality G at rotational speed: G 2.5 at 25,000 rpm
- Machining strategy: HPC
Description
Version:
- All shanks hard turned.
- Position of the grub screw for countersinking in the indexable drill offset by 0.4 mm.
- When tightening the increased contact face ⌀ is clamped against the front face of the arbor.
- Better support, allowing higher feed rates.
- High concentricity thanks to the mating surface being ground flat to 3µm.
Application:
For mounting all standard indexable drills to DIN 6595, Part 1.
Suitable for:
All indexable drills with parallel shank to DIN 6595, Part 1.