{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
426 M Holder pair 3,200 mm mounting bore 6,35 mm
Article no.: 4820375
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Test pin |
Identification numbers & Classifications
| Article number | 4820375 | |
| EAN / GTIN | 4059192039998 | |
| Manufacturer number | 4820375 | |
| L-Number | L40080 3866 |
Description
Version:
- For determining the pitch diameter of external threads by the three-wire method
- In conjunction with outside micrometers, indicating measuring instruments or measuring machines
- Each pair consists of one holder with 1 pin gage and one holder with 2 pin gages
- Holder has a satin chrome finish, the retainer ring can be locked yet the rotating spindle can still rotate
- Pin gages are hardened and lapped. Freely floating in holder to allow proper positioning and contact with thread flanks
- Manufacturing tolerance ± 0.5 ?m
- Mounting bore 6.35 mm = 1/4″, 8 mm on request)
- For threads with outer diameter up to 95 mm
Description:
426 M Thread test pins, pair of holders
- Diameter in mm: 3.2
- Receptacle bore: 6.35 mm
Feature:
- Calibration type: Uncalibrated
- Product group name: Standards and measuring standards
- Product group name: MarGage
- Product name: Thread test pins, pair of holders
- Mounting hole: 6.35 mm
- Accessory categories (eShop): 426 M Threaded test pins in holders
- Product type: 426 M
- Diameter in mm: 3.2 mm