GARANT

IT'S NOT A TRIC IT'S AN XTRIC!

CENTRE CLAMPING HAS NEVER BEEN SO EASY.

Save valuable time with the GARANT XTRIC

08239_einstieg_800x400 Variable 72.jpg

The new GARANT XTRIC is a multi-function vice and is particularly easy to use. The unique clamping concept with quick-change system for the jaws saves you a lot of time when clamping blank parts and finished parts. The versatile attachment options offer great scope for flexible handling. All this combined with very high precision and quality – Made in Germany.

A brief overview of the important facts

Discover the advantages

7551_XTRIC_Rendering_1410x.jpg
7551_XTRIC_Speed_800x415.jpg

1. XPRESS

Jaw change within 8 seconds due to click mechanism.
Quick and easy: First insert the top jaw into the dovetail and press it down with the spring plates. This is how easy it is to change the clamping range or exchange the jaws. A clamping distance between 0-144 mm can be achieved.

7551_XTRIC_Centric_800x415.jpg

2. XCELLENT CENTRIC

Adjustment of the clamping centre in the μ range
When clamping a workpiece using multiple XTRIC vices, the centre itself can be adjusted to suit the production requirements with a few movements of the hand. Adjustment 5/10 mm each side (1 mm in total) by means of scale graduations on the spindle bearing. After the screw has been released, the centre can be adjusted using a pin wrench. After this the screw is retightened.

7551_XTRIC_Precice_2_800x.jpg
(y) Aufsteigen des Bauteils in mm, (x) Spannkraft in kN

3. XACTLY PRECISE

Better clamping accuracy compared to the competition (3)
For clamping, the jaw is pushed along the specially shaped dovetail in the guide track, thus producing a pull-down effect. This creates minimal jaw lift-off whilst achieving very high clamping accuracy.
(1) Version with pivoting jaw
(2) Version with fixed jaw
(3) Competition (grey)

K-__jobs_08239_layout_bilder-grafiken_08239_Spannkraft_800x400_2.jpg

4. XTRA STRONG

Fuerza de sujeción de 25 kN
Ahorro de tiempo gracias a la forma de diente especial GARANT: no se requiere estampar previamente. Husillo recubierto de cromo.

08239_Spannkraft_800x400-Variable.jpg

6. EXTREMELY VARIABLE

Múltiples posibilidades de sujeción
Compatible con todos los sistemas de sujeción de punto cero. Directamente en el sistema de posicionamiento de "LANG" adaptable.

7551_XTRIC_Pendelbacke_800x415.jpg

5. XTREMELY FLEXIBLE

Tuerca del husillo con o sin función de péndulo
El sumplemento de tamaño P representa mordaza pendular. Con la tuerca pendular es posible la oscilación en +-2º. Seguridad mayor, por ejemplo en piezas de sierras, mediante el empleo de la tuerca pendular.

Testimonio de cliente

7551_XTRIC_Kundenstorie_APM_800x400.jpg

"La precisión y el sistema flexible de camdio de mordazas para variar el rango de sujeción en unos segundos nos ha convencido"

Philipp Ramerseder, Gerente

APM Maschinenbau GmbH, Perlesreut/Prombach 

7551_XTRIC_Kundenstorie_Kuehberger_800x400.jpg

"GARANT XTRIC tiene una relación calidad/precio imbatible que no habíamos conocido hasta ahora. Nuevas características, como el cambio de mordazas, nos ha convencido plenamente".

Christian Knödlseder, Gerente

Kühberger Metalltechnik GmbH, Waldkirchen 

XTRIC en sistema de automatización

GARANT Xtric está pensada para automatizar procesos de producción.
En el vídeo se ve una demo realizada en una empresa que la pudo probar.

7551_XTRIC_Abbinder_1410x.jpg