{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Support leg including manual height adjustment 650 mm
Article no.: 927001 650
Article code:
- Design version: Steel hollow section construction
- Colour selection: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Product details
Technical Data
| Design version | Steel hollow section construction | |
| Material thickness | 1.5 mm | |
| Colour selection | RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003 | |
| Height adjustment range | 650 mm - 800 mm | |
| Width | 50 mm | |
| Depth | 700 mm | |
| Height adjustment interval | 25 mm | |
| suitable for worktop depth | 750 mm | |
| Type of product | Support leg |
Identification numbers & Classifications
| Article number | 927001 650 | |
| EAN / GTIN | 4062406107628 |
Description
Version:
Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of media cables / power cables.
Height adjustment 150 mm.
Height adjustment 150 mm.
Supplied with:
Support leg with manual height adjustment No. 927080 size 150.
Colour:
Light grey RAL 7035, powder-coated.
Note:
Support legs without rear panel or cupboards require stabilising plates No. 927122 for stiffening.
The height is to the underside of the worktop.
Pre-assembled workbenches must be secured against tipping.
The height is to the underside of the worktop.
Pre-assembled workbenches must be secured against tipping.