{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
GARANT Master TM plain shank thread mill 2.5×D M10
Article no.: 139641 M10
Article code:
- Thread type: M; M-LH
- Flank angle: 60
- Tool material: Solid carbide
- Thread standard: DIN 13
- Shank: DIN 6535 HA to h6
Product details
Technical Data
| Thread size | M10 | |
| Coating | TiAlN | |
| Thread type | M; M-LH | |
| Flank angle | 60 degrees | |
| Tool material | Solid carbide | |
| Thread standard | DIN 13 | |
| Shank | DIN 6535 HA to h6 | |
| Thread pitch | 1.5 mm | |
| Nominal ⌀ DC | 7.95 mm | |
| Flute length Lc | 26.2 mm | |
| Shank length Ls | 36 mm | |
| Overall length L | 74 mm | |
| Shank ⌀ Ds | 8 mm | |
| Through-coolant | yes | |
| No. of teeth Z | 6 | |
| Application for type of drilling | up to 2×D for blind holes; up to 2.5×D for through holes | |
| Spacing of the cutters | unequal spacing | |
| Feed fz in steel < 750 N/mm2 | 0.075 mm | |
| Thread ⌀ | 10 mm | |
| Shank tolerance | h6 | |
| Number of clamping slots | 6 | |
| Colour ring | green | |
| Internal/external application | Internal | |
| Thread depth | 26.2 mm | |
| Series | Master TM | |
| Type of product | thread milling cutter |
Identification numbers & Classifications
| Article number | 139641 M10 | |
| EAN / GTIN | 4062406240868 |
Application Table
N
200
N
190
N
160
P
125
P
115
P
110
P
80
P
70
M
75
M
70
S
45
K
105
N
175
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Through-coolant feed ≥ M4
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- New coating for optimum wear resistance.
- Corrected thread profile for avoidance of profile distortions.
Through-coolant feed ≥ M4