Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Item no.: 139510

      Drill thread milling cutter 1.5×D TiAlN

      Brand: GARANT
      Thread type M
      Application for type of drilling up to 1.5×D for blind holes and through holes
      Thread standard DIN 13
      Skaft DIN 6535 HA with h6
      Tool material Solid carbide
      Flank angle 60
      Countersink angle 90
      Thread type M-LH
      Through-coolant true
      Number of cutting edges Z 2
      No price available

      Drill thread milling cutter 1.5×D TiAlN

      In stock

      Description

      Version:

      Corrected thread profile for milling exact internal threads (be sure to provide stable clamping conditions).
      Incorporating a countersink profile for a 90° countersink.
      A stronger core diameter, two narrow geometrically optimised chip flutes and a special drill point result in good chip formation and low cutting pressure.

      Advantage:

      Drilling, countersinking and thread milling all with a single tool!

      Technical Data

      Coating
      TiAlN 
      Thread standard
      DIN 13 
      Flank angle
      60 degrees
      Through-coolant
      yes 
      Number of cutting edges Z
      Colour ring
      without 
      Skaft
      DIN 6535 HA with h6 
      Tool material
      Solid carbide 
      Shank tolerance
      h6 
      Countersink angle
      90 degrees
      Application for type of drilling
      up to 1.5×D for blind holes and through holes 

      Application Table

      Aluminium (short chipping)
      N
      220
      Alu > 10% Si
      N
      220
      GG(G)
      K
      90
      CuZn
      N
      330
      wet maximum