Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Item no.: 176000

      Metal circular saw blade coarse HZ uncoated

      Brand: Re-bo
      Tool material HSS
      Norm DIN 1838
      No price available

      Metal circular saw blade coarse HZ uncoated

      In stock

      Description

      Version:

      All blades are hollow ground to give side clearance. All sizes with 200 mm ⌀ and very thin blades have a bore collar for stabilisation. Accuracy, tooth form, and side clearance grinding according to DIN 1840.
      DIN 1838 C coarse-toothed with curved form C. High performance tooth pitch (HZ) with high teeth and lower finishing teeth. The roughing tooth is 0.15 – 0.30 mm higher than the finishing tooth and is chamfered at both tooth corners. In this way both types of teeth share the cutting work.

      Application:

      Particularly suitable for cutting workpieces with low to medium tensile strength. High cutting performance due to the chip breaking tooth form.
      Please note: If the component is not cut through, but only cut into, the bottom of the cut will have an additional slot due to the projecting high tooth.

      Note:

      The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.

      Technical Data

      Tool material
      HSS 
      Norm
      DIN 1838 
      Coating
      uncoated 

      Application Table

      Aluminium (short chipping)
      N
      800
      Alu > 10% Si
      N
      600
      Steel < 500 N/mm²
      P
      37
      Steel < 750 N/mm²
      P
      22
      Steel < 900 N/mm²
      P
      20
      Steel < 1100 N/mm²
      P
      15
      INOX < 900 N/mm²
      M
      11
      INOX > 900 N/mm²
      M
      11
      GG(G)
      K
      27
      CuZn
      N
      400
      Uni
       
      wet maximum
       
      dry
       
      Air