Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Item no.: 179600

      Carbide-tipped circular saw blade Rake angle positive

      Brand: GARANT
      Tool material Carbide
      No price available

      Carbide-tipped circular saw blade Rake angle positive

      In stock

      Description

      Version:

      High performance toothing with high teeth and lower finishing teeth. The trapezoidal carbide tips cut easily and generate clean cut surfaces.

      Advantage:

      Particularly suitable for hard anodised profile material.

      Application:

      On high-speed machines.
      F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
      M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
      G = coarse tooth pitch for solid material such as bars and rods.
      Positive rake angle 5° for smooth, burr-free cutting on machines with saw blade infeed from below or horizontal. Very suitable for cutting to size, for mitre and ripping cuts on profiles, and for cutting into solid material.

      Note:

      • Recommended cutting speed: 40 − 80 m/s, for harder materials such as alloys, brass, bronze it is preferable to use the lowest recommended speed.
      • Pay special attention to maintaining an even feed rate; this prevents damage.
      • Size 400×. . . − When ordering please be sure to indicate: bore dia. (if other than 30 mm), and if necessary the number, and pitch circle diameter of the drive holes (ML).
        Example: 1×400×40 M − 2 ML 12/64.
        Further circular saw blades can be found in Group 58.

      Technical Data

      Tool material
      Carbide 

      Application Table

      Aluminium (short chipping)
      N
      850
      Alu > 10% Si
      N
      650
      CuZn
      N
      450
      wet minimum
       
      dry
       
      Air