{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Alternative article:
-
Article no.: 164400 5
Solid carbide reamer HPC through hole 5 mm
Article no.: 164346 5
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Through-coolant: yes, with 25 bar
- Shank: DIN 6535 HA with h6
Product details
Technical Data
| Nominal ⌀ DC | 5 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Through-coolant | yes, with 25 bar | |
| Shank | DIN 6535 HA with h6 | |
| Machining strategy | HPC | |
| Application for type of drilling | for through holes | |
| ⌀ range | 4.710 mm - 5.200 mm | |
| Flute length Lc | 12 mm | |
| Overhang L1 | 35 mm | |
| Overall length L | 75 mm | |
| Number of cutting edges Z | 4 | |
| Shank ⌀ Ds | 6 mm | |
| Feed f in cast alu | 0.8 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm | |
| Shank tolerance | h6 | |
| Colour ring | yellow | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164346 5 |
Application Table
N
250
N
250
N
250
Description
Version:
Version suitable for NC with straight shank ⌀ for standard arbors especially in hydraulic chucks or high precision collet chucks. This gives very high concentricity and process reliability. No need to procure special collets. With internal coolant supply for HPC applications to reduce manufacturing costs.
Reamers finish ground to match your specifications.
With the latest generation of DLC coating sp2.
Reamers finish ground to match your specifications.
With the latest generation of DLC coating sp2.
Application:
For HPC/HSM reaming of through holes.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product is No. 164400.
Recommended successor product is No. 164400.