Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Item no.: 185005

      Side milling cutter HSS-Co5 uncoated

      Brand: GARANT
      Tool material HSS Co 5
      Type N
      Cutting width a<sub>e</sub> for milling operation Full slot cutting depth 1×D
      Tolerance nominal ⌀ ± 0.1
      Norm DIN 885 A
      No price available

      Side milling cutter HSS-Co5 uncoated

      In stock

      Description

      Version:

      Side milling cutter similar to DIN 885-A.
      Pairs of milling cutters: Cutters with the same ⌀ and same number of teeth can be combined as a set and adjusted to the required width. Since the cutters have no raised bore collar, the staggered teeth mesh with each other.
      2-piece sets are particularly economical. By reversing the side milling cutters, both side edges of each cutter can be used.

      Note:

      • Do not clamp the cutters in a set without a sufficiently thick arbor spacer ring, otherwise the cutters will be damaged.
      • See Group 30 for suitable arbor spacer rings.

      Cutters are manufactured with external ⌀ to a tolerance ± 0.1 mm When using 2 cutters as a set and higher precision is required, the cutters must be ground as a set.
      Slots milled from solid: fz for ae = 0.1×D.

      Technical Data

      Tolerance nominal ⌀
      ± 0.1 
      Coating
      uncoated 
      Colour ring
      without 
      Norm
      DIN 885 A 
      Tool material
      HSS Co 5 
      Type
      Cutting width ae for milling operation
      Full slot cutting depth 1×D 
      Through-coolant
      no 

      Application Table

      Aluminium (short chipping)
      N
      200
      Steel < 500 N/mm²
      P
      19
      Steel < 750 N/mm²
      P
      19
      Steel < 900 N/mm²
      P
      19
      INOX < 900 N/mm²
      M
      9
      CuZn
      N
      180
      Uni
       
      wet maximum
       
      dry
       
      Air