{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Disc brush with shank, ceramic grit (CER) 80
Article no.: 575024 80
Article code:
- Grinding medium code: Ceramic
Product details
Technical Data
| Grit | 80 | |
| Brush ⌀ D1 | 25 mm | |
| Disc dia. D2 | 29 mm | |
| Grinding media | Ceramic grit (CER) | |
| Grinding medium code | Ceramic | |
| Shank ⌀ Ds | 6 mm | |
| Grit designation | coarse | |
| Bristle thickness | 1.2 mm | |
| Length of brush section H1 | 25 mm | |
| recommended speed | 1,500 min-1 - 2,500 min-1 | |
| maximum speed | 4,500 min-1 | |
| Feed | 800 mm/min - 3,000 mm/min | |
| Infeed | 0.3 (fine) – 2.0 (coarse) mm | |
| Type of product | Disc brush |
Identification numbers & Classifications
| Article number | 575024 80 | |
| EAN / GTIN | 4062406120412 |
Application Table
Description
Version:
Disc brushes with extremely tightly packed abrasive bristles (right to the edge of the brush) embedded in the plastic pad. The bristles support each other, giving a highly stable shape. Very long working life.
6 mm shank, solidly cast in place.
Nylon bristles with ceramic grit content. More aggressive abrasive effect.
6 mm shank, solidly cast in place.
Nylon bristles with ceramic grit content. More aggressive abrasive effect.
Advantage:
- Workpiece post-processing directly after the machining process.
- Reproducible results due to continuous exposure of the abrasive grit.
- Process reliability thanks to high stability and accuracy of the shape.
- Quick and secure mounting without further accessories.
- Very high concentricity.
Application:
On CNC machining centres and when used by robots, preferably wet grinding with cooling lubricant. Machining of flat components: precise deburring, edge rounding, finish machining after milling, surface finishing e.g. of sealing and mating faces.
Note:
Special versions available on request.