For precision alignment using fine pitch thread M 30×1.5. The fixed slide pad prevents the component from rotating and moving during alignment.
The parallel pins supplied are ⌀ 12×50 mm and ⌀ 12×80 mm; they can be inserted in the centring hole, increasing the overall height by 30 or 60 mm.
If the centring jack pad No. 375030 is placed under the screw jack, a support height of up to approx. 1370 mm can be achieved in combination with other screw jacks.
Note:
Flat component support face with centring hole ⌀ 12 mm for jack pads No. 375000 − 375030.