{{ name }}
Art.-nr. {{ combinedCodeWithHighlight }}
Sagsnummer:
EAN/GTIN:
Producentnummer:
Varenr.:
Kombi-fræser-/dornadapter Form ADB, SK 50 A = 130, Dorn-⌀ d1: 32mm
Art.-nr.: 300985 32
Sagsnummer:
Produktdetaljer
Teknisk data
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Holder type | iSO taper | |
| Holder shape | flat surface contact, short taper form B | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 50 | |
| Type of mounting | hole (internal mounting) | |
| Shank length | 97.5 mm | |
| Interface on machine side | SK 50 | |
| Min. clamping diameter | 32 mm | |
| Max. clamping diameter | 32 mm | |
| Gauge length | 130 mm | |
| Milling cutter spigot length | 130 mm | |
| External diameter, tool-end | 58 mm | |
| Concentricity | 5 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC | |
| Incl. RFID data carrier | nej | |
| With cooling channel bore | no | |
| Interface | joint 1; joint 2 | |
| Type of product | face mill arbor | |
| Overall length | 255.75 mm | |
| Overall height | 255.75 mm | |
| Overall width | 58 mm | |
| Standard | DIN 6358 | |
| Shape | ADB | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | heat-treatable steel | |
| Weight | 5.173 kg | |
| Content | 1 pcs. |
Identifikation og klassificering
| Artikelnummer | 300985 32 | |
| EAN/GTIN | 4045197285478 | |
| Producentnummer | 300985 32 | |
| Producent/ansvarlig person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Betegnelse
Version:
Taper shank, spigot, and all contact surfaces are ground at the collar. With Balluff/RFID chip bore.
GARANT −All shanks hard turned (for smooth cutting action!).
GARANT −All shanks hard turned (for smooth cutting action!).
Application:
- With drive key for mills with longitudinal keyway, e. g. DIN 841.
- With face mill drive ring for face mills with cross keyway, DIN 1880 and cutter heads to DIN 1830.
Supplied with:
Drive key, face mill drive ring, and lock screw.
Optional extras:
Pull studs (PS) No. 308600 − 308806, PS wrenches No. 308820 – 308835, Special toggle spanner No. 309840.
Note:
Internal cooling available only with suitable tightening screw No. 309861.