{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
GARANT Diabolo solid carbide ball nose slot drill HPC 5/6 mm
Réf.: 207472 5/6
Référence:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Détails du produit
Caractéristiques techniques
| Series | Diabolo | |
| Cutting edge ⌀ DC | 5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.2×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 9 mm | |
| Radius R | 2.5 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in steel < 65 HRC | 0.048 mm | |
| Feed fz for copy milling in steel < 65 HRC | 0.048 mm | |
| Correction factor for vc | 1.25 | |
| Colour ring | red | |
| Type of product | Ball-nosed slot drill |
Numéros d’identification et classifications
| Référence article | 207472 5/6 | |
| EAN / GTIN | 4045197600578 |
Tableau d’application
P
200
H
190
H
170
H
150
H
110
Description
Version:
GARANT Diabolo:
Special geometry, newly developed coating and carbide for hard machining. 4 centre cutting edges to the centre. Therefore can be used as a true 4-edge drill at all depths of cut.
Tolerance: Radius contour = ±0.005 mm.
Special geometry, newly developed coating and carbide for hard machining. 4 centre cutting edges to the centre. Therefore can be used as a true 4-edge drill at all depths of cut.
Tolerance: Radius contour = ±0.005 mm.