Version:
Galvanised cantilever arm rack for provision of materials and storage of lightweight and bulky materials. Cantilever arm brackets can be inserted with an insert angle of 10°. Can be fitted with locking pins, storage shelves and storage trays. 2 crossbeams inserted without play per rack bay serve to increase the stability. Base with levelling adjustment. Can also be set up on both sides in conjunction with frame connector No.
991635.
Description:
Extension size:
Basic rack and add-on rack: clear width/width of storage shelf: 994 mm, stile width: 31 mm.
Any number of add-on racks can be fitted to the basic rack, resulting in the following possible rack widths:
1056 mm = 1 basic rack; 2081 mm = 1 basic rack + 1 add-on rack; 3106 mm = 1 basic rack + 2 add-on racks; 4131 mm = 1 basic rack + 3 add-on racks
Fitted with:
Number of cantilever arms depth 400 mm: 2
Number of cantilever arms depth 500 mm: 2
Supplied with:
1 rack stile with base, 2 crossbeams, 1 base with 2 levelling bases, 1 pc. cross brace, 4 cantilever arms.
Note:
- Floor and wall fastenings are not included.
- Access from one side only due to use of diagonal braces.
- Delivered unassembled.