Version:
Top and bottom faces ground. With 25H6 M10 holes at 200 mm pitch for zero-point clamping systems.
Feature:
Sturdy, compact base body (GGG 60) with large capacity. Fully enclosed and nitrided spindle (increased operational reliability, optimised swarf protection, minimised cleaning requirement).
Function:
Clamping using adjustable torque wrench (maximum 30 Nm), requiring only minimal lost clearance around the component(in connection with jaws / gripper inserts). Using special high pressure spindle and mechanical power intensifier.
Application:
Quick and secure clamping of flame-cut and saw-cut blanks by penetration of hardened and replaceable Gripp inserts into the workpiece. Suitable for all materials with a strength of up to approximately 1000N/mm2 (exception: hardened materials).
Suitable for:
Supplied with:
4 securing bolts, hexagon screwdriver bit 3/8 inch. Additional 3 hexagon L-wrenches (5 / 8 / 10 AF).
Optional extras:
- For extension base see No. 361230 size 125.
- For gripper inserts see No. 361238 - 361250; 361260
- For stepped jaws see No. 361210; 361215.
- For fixed carrier jaw see No. 361206 size 125.
- For pivoting carrier jaws see No. 361207 size 125.
- For universal gripper set carrier jaw see No. 361208 size 125.
- For movable pivoting universal gripper set carrier jaws see No. 361209 size 125.
- For universal gripper set see No. 361345 size 125.
- For pull-down jaws see No. 361228; 361229 size 125.
- Torque wrench No. 656050 size 60
- For gripper jaws see No. 361217; 361218.
- For stepped jaws see No. 361223 size 125.
- Clamping stud No. 360025, 25M10 or 25M10/138.
- Alignment and fixing set No. 360530.