Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Article no.: 139715

      GARANT Master TM plain shank thread mill with countersink 2×D TiAlN

      Brand: GARANT
      Thread type G
      Countersink angle 90
      Thread type G-LH
      Tool material Solid carbide
      Through-coolant ja
      Spacing of the milling cutter's cutting edges unequal spacing
      Skaft DIN 6535 HA to h6
      Flank angle 55
      Application for type of drilling up to 2×D for blind holes and through holes
      No price available

      GARANT Master TM plain shank thread mill with countersink 2×D TiAlN

      In stock (13 Pieces)

      Description

      Version:

      Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
      Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
      • significantly reduced vibration due to irregular cutting edge spacing
      • increased number of cutting edges
      • new coating for optimum wear resistance
      • corrected thread profile for avoidance of profile distortions

      Advantage:

      Incorporating a countersink profile for a 90° countersink and thread milling in a single operation.
       

      Application:

      For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connections).

      Note:

      Form HB and HE supplied at the same price as HA.
      Form HB: order with No. 139715 + 129100 HB
      Form HE: order with No. 139715 + 129100 HE

      Technical Data

      Skaft
      DIN 6535 HA to h6 
      Internal/external application
      Indvendig 
      Through-coolant
      ja 
      Countersink angle
      90 degrees
      Coating
      TiAlN 
      Colour ring
      green 
      Flank angle
      55 degrees
      Application for type of drilling
      up to 2×D for blind holes and through holes 
      Tool material
      Solid carbide 
      Spacing of the milling cutter's cutting edges
      unequal spacing 

      Application Table

      Alu plastics
      N
      220
      Aluminium (short chipping)
      N
      220
      Alu > 10% Si
      N
      180
      Steel < 500 N/mm²
      P
      140
      Steel < 750 N/mm²
      P
      130
      Steel < 900 N/mm²
      P
      120
      Steel < 1100 N/mm²
      P
      90
      Steel < 1400 N/mm²
      P
      80
      Steel < 50 HRC
      H
      45
      TOOLOX 33
      H
      85
      TOOLOX 44
      H
      50
      INOX < 900 N/mm²
      M
      82
      INOX > 900 N/mm²
      M
      75
      Ti > 850 N/mm²
      S
      50
      GG(G)
      K
      120
      CuZn
      N
      200
      Uni
       
      wet maximum
       
      wet minimum
       
      Air