Version:
- The electric drive can be used to run the screw forward to the point where torque is applied. The screw is then tightened manually to the set torque. Setting and operation directly at the torque wrench.
- Quick reporting of the torque via ONE-KEY™ for generation of reports.
- LCD display with strong colours and quick response times. Feedback on status and display of relevant information.
- Warning signals can be optionally set as tactile (vibration), visual (LEDs and display) and acoustic or combinations of these. The early warning point can be entered individually.
- Up to 28,000 measured values can be saved on the torque wrench.
- With calibration reminders. After a certain number of duty cycles and elapsed time.
Units of measure: Nm, ft·lbs, in·lbs, kg·cm.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Clockwise ± 2%, anticlockwise ± 3%.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Supplied with:
Supplied with 12 V / 2.0 Ah Red Li-ion battery, C12C charger and sturdy plastic case.
Note:
See No. 073814ff and No.
073840 for suitable batteries and chargers. Recalibration is performed by the manufacturer.