{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Electronic torque wrench / rotational angle wrench, with integral display E-Torc Q
Article no.: 655002
Article code:
Click to enlarge image
Click to enlarge image
Working with procedural flow charts (workflows).
Click to enlarge image
Curve depiction and evaluation can be displayed directly on the E-Torc Q.
Click to enlarge image
Virtual progress bars for torque and angle.
Click to enlarge image
Measured value summary and evaluation.
Click to enlarge image
Communication to powerful PC operating software or connection to CAQ systems (optional).
Click to enlarge image
Clear input of target values via the touch screen.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
Description
Version:
The E-Torc Q / QR is a powerful electronic torque / rotational angle measuring wrench with the latest sensor technology and a 4.3 inch TFT display. Operation is optionally by touch function or hardware buttons. Curve depiction and evaluation can be displayed directly on the measuring tool. Parameter sets can be displayed with image data.
Data is exchanged between the torque wrench and stationary PC control software by means of Wi-Fi (2.4 and 5 GHz) or USB mini-port (from Windows® 7).
The signal transmission is shown visually by progress bars, acoustically by beep tone and by touch by means of vibration. Load cycle counter and date of the last calibration can be viewed via a menu.
Units of measure: Nm, lbfft.
Battery with quick-change system.
Data is exchanged between the torque wrench and stationary PC control software by means of Wi-Fi (2.4 and 5 GHz) or USB mini-port (from Windows® 7).
The signal transmission is shown visually by progress bars, acoustically by beep tone and by touch by means of vibration. Load cycle counter and date of the last calibration can be viewed via a menu.
Units of measure: Nm, lbfft.
Battery with quick-change system.
Function:
- Torque control
- Torque / rotational angle control
- Elastic limit monitoring: Determination of the elastic limit of bolted connections on the basis of the difference quotients.
- Prevailing torque: All processes to VDI / VDE 2645 sheet 3.
- Slackening / tightening: Determination of the torque value of a bolted connection e.g. after application of the operating load.
Application:
As an analysis and quality key. In research and development, the E-Torc Q / QR saves on costly experimental test rigs. Bolt fastening trials of tightening specifications can be performed directly on the component and documented.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Supplied with:
Supplied with plug-in reversible ratchet, charger cable, data cable, 4 GB memory, USB stick with documentation, operating manual and evaluation / operation software.
In a rectangular box with foam inlay.
In a rectangular box with foam inlay.
Note:
Please comply with the specific national requirements!
Accessories on request.
Accessories on request.