{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Disc brush, silicon carbide (SiC) 80
Article no.: 575008 80
Article code:
- Grinding medium code: SiC
Product details
Technical Data
| Grit | 80 | |
| Brush ⌀ D1 | 63 mm | |
| Disc dia. D2 | 58 mm | |
| Grinding media | Silicon carbide (SiC) | |
| Grinding medium code | SiC | |
| Grit designation | coarse | |
| Bristle thickness | 1.2 mm | |
| Working area ⌀ | 63 mm | |
| Bore ⌀ d1 | 16 with groove mm | |
| Length of brush section H1 | 30 mm | |
| recommended speed | 1,500 min-1 - 2,500 min-1 | |
| maximum speed | 4,500 min-1 | |
| Feed | 800 mm/min - 3,000 mm/min | |
| Infeed | 0.3 (fine) – 1.5 (coarse) mm | |
| Type of product | Disc brush |
Identification numbers & Classifications
| Article number | 575008 80 | |
| EAN / GTIN | 4045197977717 |
Application Table
Description
Version:
Nylon bristles with very high silicon carbide grit content for general-purpose use.
Disc brushes with extremely tightly packed abrasive bristles (right to the edge of the brush) embedded in the plastic pad. The bristles support each other, giving a highly stable shape. Very long working life.
Conical brushes for inaccessible places. Greater flexibility.
With longitudinal groove for clamping on face mill arbors (DIN 6357) and combination face mill adapters (DIN 6358).
Disc brushes with extremely tightly packed abrasive bristles (right to the edge of the brush) embedded in the plastic pad. The bristles support each other, giving a highly stable shape. Very long working life.
Conical brushes for inaccessible places. Greater flexibility.
With longitudinal groove for clamping on face mill arbors (DIN 6357) and combination face mill adapters (DIN 6358).
Advantage:
- Workpiece post-processing directly after the machining process.
- Reproducible results due to continuous exposure of the abrasive grit.
- Process reliability thanks to high stability and accuracy of the shape.
- Quick and secure mounting without further accessories.
- Very high concentricity.
Application:
On CNC machining centres and when used by robots, preferably wet grinding with cooling lubricant. Machining of flat components: precise deburring, edge rounding, finish machining after milling, surface finishing e.g. of sealing and mating faces.
Note:
Special versions available on request.