Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Article no.: 659919 50

      Torque screwdriver set, 8 pieces with scale, to take interchangeable blades, ESD 50 cN·m

      electrical insulation EGB/ESD
      Calibration O1

      Torque screwdriver set, 8 pieces with scale, to take interchangeable...

      In stock (15 Pieces)
      Unit price
      BGN 393.60
      plus VAT at the current rate Prices plus delivery costs
      50

      Add service

      • BGN111.11

      Description

      Version:

      Power grip with a non-allergenic elastomer coating. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection). The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
      Tool handle made of conductive plastic, suitable for ESDs.

      Standard:

      Tested to DIN EN ISO 6789.

      Content table use:

      Torque screwdriver: 1 pc.
      3 blades for slot-head / Phillips (No. 669605): 2 / 00; 2.5 / 0; 3.5 / 1
      2 hexagon blades (No. 669606): 1.5 / 2; 2.5 / 3
      2 bits for Torx® screws (No. 669607): TX6 / TX7; TX8 / TX9

      Technical Data

      electrical insulation
      EGB/ESD 
      Torque measuring accuracy
      ±6 %
      Calibration
      O1 
      Display
      analogue 
      Test certificate
      Manufacturer’s test certificate 
      Direction of tightening
      Right-hand tightening 
      Release signalling
      akustisk ; haptisk 
      maximum torque
      50 cN·m
      Measurement technology
      mechanical 
      Torque range
      0.1 N·m - 0.5 N·m
      Torque range
      10 cN·m - 50 cN·m
      Scale graduation, 1 graduation =
      1 cN·m
      Drive profile
      Hexagon screwdriver ; Screwdriver for Phillips ; Slot-head screwdriver ; Screwdriver for TORX® screws 
      Norm
      DIN EN ISO 6789 
      Overall length L
      106 mm
      Reversible reading
      cNm 
      Feedback
      udløsning 
      Data can be recorded
      no 
      Trigger principle
      mekanisk glidekobling 
      Setting the trigger value
      with adjustment scale 
      Adjustable trigger value
      adjustable 
      Connection format
      udskiftelig klinge 
      Measurement process
      Torque 

      Accessories and spare parts