{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Solid lathe centre WS 4
Article no.: 323400 4
Article code:
Product details
Technical Data
| Morse taper | 4 | |
| External ⌀ D | 31.6 mm | |
| Overall length L | 160 mm | |
| Face length L1 | 50 mm | |
| Face-point distance b | 5 mm | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 323400 4 | |
| EAN / GTIN | 4045197296634 |
Description
Version:
Point angle 60°, surfaces ground.
Full point of tool steel, through hardened.
Full point of tool steel, through hardened.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Standard:
DIN 806