{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
High-precision countersink with unequal spacing and 3 drive flats 90° 6 mm
Artikelnummer: 150132 6
Klantartikelnummer:
- Countersink tip angle: 90
- Tool material: HSS
- Spacing of the countersink cutting edges: unequal spacing
- Number of cutting edges Z: 3
- Standard: DIN 335 C
Productdetails
Technische gegevens
| External ⌀ | 6 mm | |
| Coating | TiAlN | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS | |
| Spacing of the countersink cutting edges | unequal spacing | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 335 C | |
| Shank | Shank with h9 and three drive flats | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 1,5 mm | |
| Overall length L | 45 mm | |
| Shank ⌀ Ds | 5 mm | |
| for countersunk screws ISO 2009, 2010, 7046, 7047 | M3 | |
| Feed f in steel < 500 N/mm2 | 0,1 mm/rev. | |
| Shank tolerance | h9 | |
| Colour ring | green | |
| Type of product | Stepped drill and countersink |
Identificatienummers en classificaties
| Artikelnummer | 150132 6 | |
| EAN/GTIN | 4045197741912 |
Toepassingstabel
N
75
N
75
N
50
P
65
P
50
P
30
P
18
P
8
H
8
M
16
M
10
S
12
K
25
N
60
N
Omschrijving
Version:
All countersinks have 3 cutting edges. Special geometry with extremely unequal spacing and matching cutting edge preparation. Radially relief ground. Flutes ground from solid. Newly developed special TiAlN coating for long service life.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Three drive flats on the shank for use in a 3-jaw chuck.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Three drive flats on the shank for use in a 3-jaw chuck.
Advantage:
Very smooth cutting throughout the entire countersinking operation. Chatter-free running for perfect results and optimum tool service life.
Application:
High-precision countersinks for production of exactly round 90° countersunk surfaces.
Downloads en documenten
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High-precision countersink with unequal spacing and 3 drive flats 90° 6 mm
op aanvraag
Op voorraad
100 stuks direct leverbaar
36,57 €
Excl. BTW
Excl. verzendkosten
|
||
| Number of cutting edges Z | 3 | 3 |
| Colour ring | green | green |
| for countersunk screws ISO 2009, 2010, 7046, 7047 | M3 | M3 |
| Overall length L | 45 | 45 |
| Shank tolerance | h9 | h9 |
| Tool material | HSS | HSS |
| Type of product | Stepped drill and countersink | Stepped drill and countersink |