Article no.: 236603

KOMET KUB Pentron® Wendeplatten-Vollbohrer ABS® Schaft 4×D

Brand: KOMET®
Skaft ABS
Use for drilling limited cross-drilling
Use for drilling limited drilling through a stack
Machining strategy HPC
Use for drilling limited cross-drilling
Use for drilling limited convexity
Drill depth for indexable insert drill up to 4×D
Use for drilling limited drilling with oblique exit
Through-coolant yes
Use for drilling limited centre drilling

Description

Version:

Bore tolerance: D − 0.1 / + 0.3

Application:

With indexable inserts No. 236605 − 236610.

Note:

  • For use only under stable machining conditions.
  • Offset-axis drilling is possible up to Vmax = 0.25 mm, e.g. with eccentric adjusting unit No. 239010 to 239012.
  • Maximum ⌀ = D + 0.5 mm achievable by offsetting.
  • Version with PSC shank available on request.

Technical Data

Point angle
180 degrees
Drill depth for indexable insert drill up to
4×D
Skaft
ABS
Use for drilling
limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
Through-coolant
yes
Machining strategy
HPC
loading spinner image
loading spinner image